New: film your home on your phone, get a guaranteed price.Start a video estimate

Moving guide

Do movers charge by weight or by cubic feet? How long-distance moves are measured

Long-distance movers charge either by weight or by volume (cubic feet), and federal rules allow both: what matters is that the basis, and any minimum weight or volume charge, is written on your estimate and bill of lading. Local moves are usually charged by the hour instead. If an interstate mover's final price depends on weight, the rules say exactly how the truck must be weighed, that you may watch every weighing, and that you may demand a reweigh before unloading. Here is how each method works, what your rights are, and how Green Van Lines prices moves from Dallas–Fort Worth.

Green Van Lines truck with its doors open, packed with yellow reusable crates and branded boxes

Weight, volume or the hour: the three ways moves are priced

There is no single federal pricing method for household moves. The federal bill of lading rule simply requires the mover to list any minimum weight- or volume-based rates and minimum charges that apply to your shipment, or to have a tariff that says how final charges are computed from the actual weight or volume. In other words, a mover may price an interstate move by the pound or by the cubic foot, as long as it tells you which in writing.

If a mover estimates your move by volume and then converts that volume into a weight for billing, it must give you a written explanation of the conversion. That is worth asking for, because a conversion you cannot see is a number you cannot check.

Local moves work differently. Across town, most movers bill by crew time: the number of movers and trucks multiplied by the hours the job takes, often with a minimum.

  • By weight: the truck is weighed empty and full, and the difference is your shipment's weight.
  • By volume: your belongings are measured, or estimated from a survey, in cubic feet of truck space.
  • By the hour: common for local moves, billed by movers, trucks and time.

Sources:eCFR: 49 CFR 375.505(b)(14), minimum weight or volume charges on the bill of lading eCFR: 49 CFR 375.507(c), written explanation of volume-to-weight conversions

How an interstate mover must weigh your shipment

When a move is on a non-binding estimate that depends on weight, the mover must weigh the shipment before charging for it, and it must use a certified scale. The regulation allows two methods, and both measure the difference between the truck with and without your goods.

For both weighings the truck must carry all of its pads, dollies, hand trucks, ramps and other equipment, the driver and everyone else must be off the vehicle, and the fuel tanks must be full (or, on an origin weigh, no fuel may be added between the two weighings). Those conditions exist so that nothing except your belongings changes the number. Shipments of 3,000 pounds or less may instead be weighed on a certified platform or warehouse scale before loading or after unloading.

  • Origin weigh: the empty truck (tare weight) is weighed before loading, then weighed again full (gross weight) after loading.
  • Back weigh: the loaded truck is weighed at destination, then weighed again empty after unloading.
  • Net weight, what you are billed on, is the gross weight minus the tare weight.

Sources:eCFR: 49 CFR 375.507, 375.509 and 375.511 (weighing methods and conditions) FMCSA: Protect Your Move glossary (Tare Weight, Gross Weight, Net Weight)

Your rights when the price depends on weight

Federal rules give the customer several protections whenever an interstate mover bills by weight. They are worth knowing before the truck pulls away, because some of them only work if you use them before delivery.

  • Watch every weighing: the mover must tell you where and when each weighing will happen and give you a reasonable chance to be there. If you choose not to attend a weighing, you are presumed to have waived that right; waiving a reweigh has to be done in writing.
  • Demand a reweigh: on a shipment weighed at origin, you may demand a reweigh after the mover tells you the billing weight and charges and before unloading starts. The bill must then be based on the reweigh.
  • Get the weight tickets: each weighing needs a signed weight ticket showing the scale's name and location, the date, tare, gross or net, the vehicle, your last name and the shipment number. To collect charges that depend on weight, the freight bill must include true copies of those tickets.
  • Know the weight and charges in advance: on a collect-on-delivery shipment you can ask to be told the actual weight or volume and the charges, and the mover must give you at least one full day's notice before delivery (weekends and federal holidays excluded), with a few exceptions such as a back-weighed shipment.

Sources:eCFR: 49 CFR 375.513 to 375.521 (observing weighings, reweighs, weight tickets, advance notice) FMCSA: Protect Your Move glossary (Reweigh)

When the weight changes your price, and when it does not

The actual weight matters most on a non-binding estimate, where the final bill follows what your shipment really weighs. Even then, the most a mover may demand at delivery is 110 percent of the non-binding estimate, plus any services you requested after the bill of lading was issued and, if they apply, impracticable-operation charges capped at 15 percent of the other charges. Anything above that is billed afterwards, not collected at the door.

On a binding estimate the price is fixed: the maximum at delivery is the exact estimate, plus added services you requested and any impracticable-operation charges under the same 15 percent cap. The scale reading does not move a binding price. That is why the accuracy of the survey behind the estimate matters more than the method of measurement.

Sources:eCFR: 49 CFR 375.703 (maximum collect-on-delivery amounts, binding and non-binding) Green Van Lines: Interstate moving estimates explained

How Green Van Lines prices moves

Long-distance moves from Dallas–Fort Worth are priced by volume, not weight: $5 per cubic foot with a $1,800 minimum, plus a 10% fuel surcharge, on a shared truck. For a typical home that is about $2,000 for a studio, $2,550 to $3,500 for a 1-bedroom, $4,200 to $5,700 for a 2-bedroom, $6,550 to $8,850 for a 3-bedroom, $9,350 to $12,650 for a 4-bedroom. The price is set in writing from a survey of your things, by video or in person, and a written estimate replaces the guide with a binding price, so it is not tied to a scale reading at the end.

Local and in-state Texas moves are billed by crew time: $69 per mover per hour plus $28 per truck per hour, with a $470 minimum. Neither weight nor cubic feet sets the price there; the hours do.

Because a long-distance price follows volume, the simplest way to lower it is to ship less. Furniture you plan to replace anyway, and boxes you have not opened since the last move, are the first things to cut.

Sources:Green Van Lines: Long-distance movers (rates and how quotes work) Green Van Lines: How much does it cost to move out of state from Texas?

Quick answers

Do movers charge by weight or by cubic feet?

Either. Federal rules let interstate movers price by weight or by volume, as long as the basis and any minimum weight or volume charge are written on the estimate and bill of lading. Local moves are usually billed by the hour instead.

How do movers weigh a shipment?

On a certified scale, by weighing the truck empty and full. An origin weigh is done before and after loading; a back weigh is done full at destination and empty after unloading. Your billing weight is the difference. Shipments of 3,000 pounds or less may be weighed on a certified platform or warehouse scale.

Can I watch my shipment being weighed?

Yes. On an interstate move the mover must tell you where and when each weighing will take place and give you a reasonable chance to watch. If you skip a weighing you are presumed to have waived that right; waiving a reweigh must be done in writing.

Can I ask for a reweigh?

Yes. If your shipment was weighed at origin, you can demand a reweigh after the mover tells you the billing weight and charges and before unloading begins. The mover must then bill you on the reweigh weight.

Does the weight matter on a binding estimate?

No. A binding estimate fixes the price, so the scale reading does not change it. You pay the estimate plus any services you added after the bill of lading was issued and, if they apply, impracticable-operation charges capped at 15 percent.

Does Green Van Lines charge by weight?

No. Long-distance moves are priced by volume, at $5 per cubic foot with a $1,800 minimum plus a 10% fuel surcharge, and local and in-state Texas moves are billed by the hour at $69 per mover and $28 per truck.

Related

Next step

Get a real quote, not a range.

Tell us where you are leaving from, where you are going, and roughly what is coming with you. A Green Van Lines move coordinator will confirm your lane and your window in writing.

Start my quote